Все продукты
-
Вере ДэниэлаОтношение дела на 3 лет, больший партнер для сплава кобальта никеля! -
Каролина ФасиоСвоевременная доставка. И поддержка хороша и быстра.
High temperature Inconel 718 plus hardened nickel-base alloy
| Место происхождения | Китай |
|---|---|
| Фирменное наименование | XUNSHI |
| Сертификация | ISO9001:2015 |
| Номер модели | Inconel 718 положительных величин |
| Количество мин заказа | 200kg |
| Цена | Negotiable |
| Упаковывая детали | случай переклейки |
| Время доставки | 45-60 дней |
| Условия оплаты | T/T |
| Поставка способности | 5000Кг в месяц |
Свяжитесь я бесплатно образцы и талоны.
WhatsApp:0086 18588475571
Вичат: 0086 18588475571
Скайп: sales10@aixton.com
Если вы имеете любую заботу, то мы предусматриваем 24-часовую интерактивную справку.
xПодробная информация о продукте
| Модель | Inconel 718Plus | Равное имя | ATI 718Plus, Allvac 718Plus |
|---|---|---|---|
| Спецификации | AMS 5441, AMS 5442 | Формы Avialable | слиток, заготовка, блок, выкованный круглый бар, горячекатаные формы и прямоугольники, бар, штанга, |
| Плотность | 8.25g/cm |
Характер продукции
High temperature Inconel 718 plus hardened nickel-base alloy for Copper-extruded mold
Inconel 718 Plus (UNSN 07818) is a new hardened nickel-base alloy, this alloy is designed to have excellent comprehensive mechanical properties, good heat processing and welding properties, and appropriate cost below 700°C . The launch of the 718plus alloy effectively fills the long-standing gap between the two most widely used High-temperature alloys Inconel 718 (650 °C) and Waspaloy (750 °C).
The Inconel 718 Plus was based on Inconel 718 to reduce the iron content by 18% to 10%, adding 9% cobalt and 1% tungsten, adjusting Al + Ti and Al/Ti, and appropriately increasing the niobium content, 718 Plus alloy overcomes the Insufficient requirements of the two alloy 718 and Waspaloy (GH4738),so that could be used and 700°C
718,718Plus,Waspaloy Chemical Composition comparison
| element | C | Ni | Cr | Mo | W | Co | Fe | Nb | Ti | Al | P | B |
| 718 | 0.025 | Remain | 18.10 | 2.80 | - | - | 18.00 | 5.40 | 1.00 | 0.45 | 0.007 | 0.004 |
| 718 Plus | 0.020 | Remain | 18.00 | 2.75 | 1.00 | 9.00 | 10.00 | 5.45 | 0.70 | 1.45 | 0.010 | 0.004 |
| Waspaloy | 0.035 | Remain | 19.40 | 4.25 | - | 13.25 | - | - | 3.00 | 1.30 | 0.006 | 0.006 |
Application
These products have been typically used for parts requiring high resistance to creep and stress rupture up to 1400°F(760°C) and oxidation resistance up to 1800°F(982°C), but usage is not limited to such applications.
At present, the alloy The 718 Plus has been promoted and applied in several well-known aviation-engine companies, for plates, gates, fasteners, blades and so on.
The 718 Plus is also a commonly used material for copper extrusion mold.
Available forms
718Plus alloy is available in all product forms: ingot, billet, block, forged round bar, hot-rolled shapes and rectangles, bar, rod, wire, plate, sheet, strip, and castings.
Порекомендованные продукты